爬行类四足仿生机器人的数字化建模与应用

郑州轻工业学院机电工程学院, 河南郑州 450002
基金项目:国家自然科学基金项目(50875246)
河南省重点科技攻关项目(152102210145)
河南省高校科技创新团队支持计划(2012IRTSTHN013)
中图分类号:TH213.3

Digital model and application of the reptile-like quadruped bionic robot

College of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China
Received Date:2015-03-02
Available Online:2016-03-15
CLC number:TH213.3

摘要:爬行类四足仿生机器人具有冗余驱动的特征,其正运动学分析位移过程十分困难.基于四足步行机器人构型爬行类四足仿生机器人数字化模型的建模技术为:通过数字模型,驱动机器人的尺寸与主动关节角度,使机器人运动到相应位置.在确定了机器人模型的位置和姿态后,进行草图绘制建立坐标系.利用SolidWorks中的测量函数,进行参数的测定,结合齐次变化矩阵,可以获得机器人位置和姿态的解.该方法用于机器人的运动学分析时,不需要进行详细的运动学公式的推导,只需要明确机器人各个零部件之间的约束关系,确定主动约束和被动约束即可.该方法的思想可以广泛应用于具有冗余驱动的机构运动分析中.
- 爬行类四足仿生机器人/
- 机器人构型/
- 数字化模型/
- 冗余驱动
Abstract:Because of redundant driving characteristics of the reptile-like quadruped bionic robot, displacement analysis process of forward kinematics was very difficult.The modeling technology of digital model for the reptile-like quadruped bionic robot base on the quadruped bionic robot configuration was as follows: frame size and active driving angle were driven by parameterized model, to make the robot move to the corresponding position.The coordinate system was built in preliminary sketch after the position and posture of robot were confirmed.The parameters were measured by SolidWorks measuring functions and then the position and posture result of robot were obtained through combining homogeneous matrices.When the method was applied to analyze kinematics of robot, rather than the derivation of detailed kinematics formula, only the active constraint and passive constraint relationship among the parts of robot was required.The idea of the method could be used widely for kinematics analysis of redundant driving structure.
- reptile-like quadruped bionic robot/
- robot configuration/
- digital model/
- redundant driving
1. [1]
  JONAS B,JERRY P,NICHOLAS R.Editorial:special issue on legged locomotion[J].International journal of robotics research,2011,30(2):139.
2. [2]
  WANG L W,CHEN X D,WANG X J,et al.Motion error compensation of multi-legged walking robots[J].Chinese journal of mechanical engineering,2012,25(4):639.
3. [3]
  WEN F,LIANG C.Displacement analysis of the 6-6 stewart platform mechanisms[J].Mechanism and machine theory,1994,29(4):547.
4. [4]
  DASGUPTA B,MRUTHYUNJIYA T S.A canonical formulation of the direct position kinematics problems for a general 6-6 stewart platform[J].Mechanism and machine theory,1994,29(6):819.
5. [5]
  BOUDREAU R,TURKKAN N.Solving the forward kinematics of parallel manipulators with a genetic algorithm[J].Journal of robotic systems,1996,13(2):111.
6. [6]
  DIDRIT O,PETITOT M,WALTER E.Guaranteed solution of direct kinematic problems for general configurations of parallel manipulator[J].IEEE transactions on robotics automation,1998,14(2):259.
7. [7]
  WANG X J,CHEN X D,LI P G,et al.A study of analytical forward kinematics of multi-legged walking robot location[J].Machine intelligence and robotic control,2006,6(2):22.
8. [8]
  王良文,潘春梅,王新杰,等.基于手脚融合功能的多足步行机器人正运动学分析[J].机械设计,2010,27(11):38.
9. [9]
  王良文,唐维纲,王新杰,等.基于计算机辅助几何法的多足步行机器人运动学分析系统[J].机械设计,2012,29(7):29.
10. [10]
  陈学东,孙翊,贾文川.多足步行机器人运动规划与控制[M].武汉:华中科技大学出版社,2006.
11. [11]
  叶修梓,陈超祥.SolidWorks高级教程:二次开发与API[M].北京:机械工业出版社,2009:1-133.
1. [1]
  代光辉,崔光照,过金超. 多足电控吸附攀爬机器人的设计. 轻工学报, 2013, 28(2): 18-21.doi: 10.3969/j.issn.2095-476X.2013.02.005
2. [2]
  张欲晓,杨志林,王新杰,曾显群. 手脚融合多足机器人控制系统设计. 轻工学报, 2011, 26(1): 107-110.doi: 10.3969/j.issn.1004-1478.2011.01.027
3. [3]
  顾冬华,王宏,孙冬. 一种改进的机器人测距定位摄像机标定方法. 轻工学报, 2015, 30(5-6): 121-123.doi: 10.3969/j.issn.2095-476X.2015.5/6.025
4. [4]
  过金超,刘征,崔光照. 基于人工免疫网络理论的移动机器人路径规划. 轻工学报, 2012, 27(4): 1-5.doi: 10.3969/j.issn.1004-1478.2012.04.001
5. [5]
  王威,许勇,刘勇,宋伟. 基于Matlab的双机器人协作空间求解及分析. 轻工学报, 2019, 34(4): 102-108.doi: 10.3969/j.issn.2096-1553.2019.04.015
6. [6]
  林国,李伟超. 输电线路巡线机器人障碍物识别综述. 轻工学报, 2012, 27(3): 93-97.doi: 10.3969/j.issn.1004-1478.2012.03.025
7. [7]
  曾疆伟,周剑秋. 6-DOF工业机器人相贯线焊接运动规划. 轻工学报, 2019, 34(2): 102-108.doi: 10.3969/j.issn.2096-1553.2019.02.014
8. [8]
  赵明辉,耿盛涛. 基于颜色和形状的机器人运动目标跟踪. 轻工学报, 2011, 26(3): 38-41.doi: 10.3969/j.issn.1004-1478.2011.03.010
9. [9]
  毕亚东. 基于螺旋理论的3-RRS并联机器人运动学分析. 轻工学报, 2013, 28(6): 67-72.doi: 10.3969/j.issn.2095-476X.2013.06.016
10. [10]
  高瑜,过金超,崔光照. 一种改进的多机器人路径规划自适应人工势场法. 轻工学报, 2013, 28(6): 77-80.doi: 10.3969/j.issn.2095-476X.2013.06.018
11. [11]
  张志远,赵幸,靳晔. 基于生物激励神经网络的清洁机器人遍历路径规划算法的改进. 轻工学报, 2018, 33(4): 73-78,85.doi: 10.3969/j.issn.2096-1553.2018.04.010
12. [12]
  陆晨,黄立新,朱建柳. 基于Simulink/Carsim的轮式移动机器人的联合仿真及其横向稳定性研究. 轻工学报, 2019, 34(5): 88-95.doi: 10.3969/j.issn.2096-1553.2019.05.012
13. [13]
  梁诤,许勇,吕叶萍. 基于6-SPU并联机构的铆孔机器人静力学分析. 轻工学报, 2019, 34(4): 96-101.doi: 10.3969/j.issn.2096-1553.2019.04.014
14. [14]
  孙玉胜,郑彩玲. 基于D-S证据理论的机器人多传感器信息融合方法研究. 轻工学报, 2011, 26(2): 60-63.doi: 10.3969/j.issn.1004-1478.2011.02.015
15. [15]
  郑晓婉,闫艳霞,苗维普,姚文波,李海威. 一种用于便携式12导数字化心电导联线的QRS波检测方法. 轻工学报, 2015, 30(1): 100-103.doi: 10.3969/j.issn.2095-476X.2015.01.021
16. [16]
  舒雄,高银桥. 微型四轮独立驱动电动汽车动力参数设计与验证. 轻工学报, 2015, 30(2): 83-87.doi: 10.3969/j.issn.2095-476X.2015.02.018
17. [17]
  胡光武,张超钦,邬可可. 地址语义驱动的服务功能链架构方案研究. 轻工学报, 2020, 35(5): 71-79.doi: 10.12187/2020.05.010
18. [18]
  滕立伟,李小花. USB 3.0设备中并行循环冗余校验的研究与实现. 轻工学报, 2012, 27(6): 65-68,72.doi: 10.3969/j.issn.2095-476X.2012.06.018
19. [19]
  王宁宁. 最优加权融合SO₂转化率预测模型. 轻工学报, 2015, 30(3-4): 138-141.doi: 10.3969/j.issn.2095-476X.2015.3/4.030
20. [20]
  金保华,殷长魁,张卫正,张伟伟. 基于机器视觉的苹果园果实识别研究综述. 轻工学报, 2019, 34(2): 71-81.doi: 10.3969/j.issn.2096-1553.2019.02.010

点击查看大图

计量

PDF下载量:132
文章访问数:8533
引证文献数:0

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

爬行类四足仿生机器人的数字化建模与应用

Digital model and application of the reptile-like quadruped bionic robot

计量

通讯作者:陈斌, bchen63@163.com

爬行类四足仿生机器人的数字化建模与应用

English Abstract

Digital model and application of the reptile-like quadruped bionic robot

目录

爬行类四足仿生机器人的数字化建模与应用

Digital model and application of the reptile-like quadruped bionic robot

计量

文章相关

通讯作者:陈斌, bchen63@163.com

爬行类四足仿生机器人的数字化建模与应用

English Abstract

Digital model and application of the reptile-like quadruped bionic robot

目录