科研论文
序号 |
论文名称 |
发表刊物 |
发表时间 |
作者 |
37 |
Effect of Co content on the microstructure, spreadability, conductivity and corrosion resistance of Sn-0.7Cu alloy |
Microelectronics Reliability |
2020 |
樊江磊等 |
36 |
Microstructure Evolution, Thermal and Mechanical Property of Co Alloyed Sn-0.7Cu Lead-Free Solder |
Journal of Electronic Materials |
2020 |
樊江磊等 |
35 |
Effect of carbon-fibre powder on friction and wear properties of copper-matrix composites |
Materials Science and Technology |
2020 |
樊江磊等 |
34 |
Sn-Cu-Ni系无铅钎料研究进展 |
热加工工艺 |
2020 |
樊江磊等 |
33 |
Recent Research and Development of Mould Materials for Casting TiAl Alloys |
Materials Science and Technology |
2019 |
樊江磊等 |
32 |
Effect of Co substitution for Fe on the non-isothermal crystallization kinetics of Fe80P13C7 bulk metallic glasses |
Thermochemical Acta |
2019 |
王艳等 |
31 |
Tribological behavior of Cu-15Ni-8Sn/graphite under sea water, distilled water and dry-sliding conditions |
Journal of Central South University |
2019 |
王艳等 |
30 |
Effect of ultrafine gradient cemented carbides substrate on the performance of coating tools for titanium alloy high speed cutting |
International Journal of Refractory Metals; Hard Materials |
2019 |
周向葵等 |
29 |
Preparation and microstructure of layered structure functional gradient cemented carbides |
Functional Materials Letters |
2019 |
周向葵等 |
28 |
Effect of Compaction Parameters on the Magnetic and Corrosive Properties of Soft Magnetic Composites with Parylene Insulation |
Journal of Superconductivity and Novel Magnetism |
2019 |
吴深等 |
27 |
Use of an Irregular Cone to Reduce Ice-Induced Vibration of a Vertical Riser Pipe |
Journal of Cold Regions Engineering |
2019 |
王胜永等 |
26 |
Vibration based numerical and experimental analysis on debonding defect identification for lattice sandwich plate |
International journal of applied electromagnetics and mechanics |
2019 |
田淑侠等 |
25 |
FeSi6.5/Fe复合磁粉芯的制备及磁性能研究 |
电子材料与元件 |
2019 |
吴深 |
24 |
高Nb-TiAl合金α2→α等温相变中的组织演变 |
钛工艺进展 |
2019 |
李莹等 |
23 |
摩擦环境对Cu/graphite复合材料摩擦磨损行为的影响 |
热加工工艺 |
2019 |
王艳等 |
22 |
成型压力对铜基粉末冶金摩擦材料性能的影响 |
有色金属 （冶炼部分） |
2019 |
刘建秀等 |
21 |
WC含量对铜基粉末冶金摩擦材料性能的影响 |
粉末冶金工业 |
2019 |
刘建秀等 |
20 |
Cu粉类型对铜基摩擦材料性能的影响 |
特种铸造及有色合金 |
2019 |
刘建秀等 |
19 |
Cr-Fe类型对铜基粉末冶金摩擦材料性能的影响 |
粉末冶金工业 |
2019 |
刘建秀等 |
18 |
微纳米双尺度混杂颗粒增强铝基复合材料的制备工艺 |
有色金属工程 |
2019 |
高红霞等 |
17 |
混杂颗粒增强铝基复合材料的研究进展 |
粉末冶金工业 |
2019 |
高红霞等 |
16 |
Effect of Ni layer on the microstructure evolution and mechanical property of Cu-based bearing shell with aging treatment |
Materials Chemistry and Physics |
2018 |
樊江磊等 |
15 |
Effect of Cr–Fe on friction and wear properties of Cu-based friction material |
Materials Science and Technology |
2018 |
樊江磊等 |
14 |
Synthesis and magnetic properties of soft magnetic composites based on silicone resin-coated iron powders |
Journal of Superconductivity and Novel Magnetism |
2018 |
吴深等 |
13 |
Vibration Based Numerical and Experimental Analysis on Debonding Defect Identification for Lattice Sandwich Plate |
International Journal of Applied Electromagnetic Mechanics |
2018 |
田淑侠等 |
12 |
Sn-Cu系无铅钎料微合金化研究进展 |
材料导报 |
2018 |
樊江磊等 |
11 |
碳纤维增强铜基复合材料研究进展 |
材料科学与工程学报 |
2018 |
刘建秀等 |
10 |
基体铜的粒度对铜基粉末冶金摩擦材料性能的影响 |
材料与冶金学报 |
2018 |
刘建秀等 |
9 |
Co含量对Sn-0.7Cu合金组织演化及力学性能的影响 |
热加工工艺 |
2018 |
樊江磊等 |
8 |
热处理和粉末形态对Fe-SiO2软磁复合材料磁性能的影响 |
热加工工艺 |
2018 |
吴深等 |
7 |
SiC颗粒增强耐磨铝基复合材料组织及性能研究 |
热加工工艺 |
2018 |
高红霞等 |
6 |
Effects of solidification parameters on the growth direction of α phase in directionally solidified Ti-49Al alloy |
Intermetallics |
2017 |
樊江磊等 |
5 |
Microstructure formation and interface characteristic of directionally solidified TiAl-Si alloy in alumina crucible with new Y2O3skull-aided technology |
Scientific Reports |
2017 |
樊江磊等 |
4 |
立方相对超细晶梯度硬质合金组织和性能的影响 |
稀有金属材料与工程 |
2017 |
周向葵等 |
3 |
Ni层对时效处理离心浇铸铜基轴瓦组织和性能的影响 |
材料导报 |
2017 |
樊江磊等 |
2 |
NiZnFe2O4包覆铁基软磁复合材料的制备及性能 |
材料工程 |
2017 |
吴深等 |
1 |
压电陶瓷精密位移系统的变论域模糊控制法 |
自动化与仪表 |
2017 |
刘建秀等 |
